wlan0 Link encap:Ethernet HWaddr 00:09:2D:83:B0:85 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
That is all.
6 comments:
Is this what I think it is?
Probably :)
I hope it :D
Are you using the Firmware from WM that is up on the wiki? There was some ambiguity about the contents of that and I'm wondering if you have figured it out.
I'm using that firmware (which is the same as my X51v had under \Windows) for the ACX100 and also RADIO0d.BIN for the MAX2820. build.sh should download both as required.
Just thought I'd update you on where it stands as of now (if you want to play with it do make sure you update from git, I added a command ./build.sh -u which will update everything now). The driver is built by build.sh and installed etc, so that should be automatic for everyone. Android and it's wpa_supplicant are hooked up to make use of it, and turning WiFi on/off in settings will load/unload the module. When loaded, it is capable of loading firmware onto the ACX100 and MAX2820. Then a scan will be attempted, but it doesn't detect any networks. My brain needs rest, so that's all for today. Enjoy :)
Post a Comment