Sunday 29 August 2010

Coming Soon

wlan0     Link encap:Ethernet  HWaddr 00:09:2D:83:B0:85  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

That is all.


6 comments:

Anonymous said...

Is this what I think it is?

Paul Burton said...

Probably :)

fidojones said...

I hope it :D

Anonymous said...

Are you using the Firmware from WM that is up on the wiki? There was some ambiguity about the contents of that and I'm wondering if you have figured it out.

Paul Burton said...

I'm using that firmware (which is the same as my X51v had under \Windows) for the ACX100 and also RADIO0d.BIN for the MAX2820. build.sh should download both as required.

Paul Burton said...

Just thought I'd update you on where it stands as of now (if you want to play with it do make sure you update from git, I added a command ./build.sh -u which will update everything now). The driver is built by build.sh and installed etc, so that should be automatic for everyone. Android and it's wpa_supplicant are hooked up to make use of it, and turning WiFi on/off in settings will load/unload the module. When loaded, it is capable of loading firmware onto the ACX100 and MAX2820. Then a scan will be attempted, but it doesn't detect any networks. My brain needs rest, so that's all for today. Enjoy :)